Magnus Rex 5000H/TL750A Fluid Head Tripod

The Magnus REX VT-5000 2-Stage Video Tripod with Fluid Head supports cameras and accessories weighing up to 17 pounds. The head accepts a sliding balance plate with 3.25" of adjustment. It features independent pan and tilt locks with variable fluid tilt drag and a 75mm leveling ball. Two 1/4"-20 accessory mounting holes are built into the head. The legs are made from aluminum and feature three sections with lever locks. The head and legs combination features a height range of 29 to 64.25" and folds to 32.6" long for transport and storage. Dual-spiked feet and a mid-level spreader make an excellent combination for shooting on uneven terrain. The mid-level spreader has 4.25" of adjustment, allowing you to spread the legs wide for a more stable base. The spiked feet are suitable for use on exteriors and soft surfaces. When shooting on hard or delicate surfaces, the included rubber feet may give you better grip and protect the surface from the spikes. Built into one of the legs is a hook on an elastic line to help secure the legs from opening accidentally when closed. An included padded bag carries your tripod legs and head, and it includes a shoulder strap for ease of carry. Fluid Head The head features spring-loaded counterbalance with pan and tilt fluid drag. Tilt drag is variable and can be adjusted to provide more or less drag, allowing you to fine-tune the head to match the needs of the shot. The sliding balance camera plate features a spring-loaded locating pin and supports both 1/4"-20 and 3/8"-16 camera tie-down screws (included). The camera plate features 3.25" of travel, providing a wide range of movement to balance your camera on the head for optimum operation. Two 1/4"-20 threaded accessory mounting holes are integrated into the head, and they allow you to mount a variety of accessories, including articulating arms and mounting brackets. The head features two pan handle rosettes for left- or right-handed operation. One pan handle is included with the system and it includes a rosette washer that helps protect the rosettes from stripping. Tripod Legs The included mid-level spreader is adjustable, allowing you to spread the legs for a more stable shot or draw them close to gain height. The legs can be closed with the spreader attached. The legs feature independent leg spread and height adjustment, useful for working on even surfaces such as rocky terrain or stairs. The legs feature dual-spiked feet that provide solid purchase on soft surfaces when the legs are spread wide or extended to full height. The rubber feet attach to the spiked feet for working on delicate or hard surfaces. An elastic line with attached hook extends from the bottom of one of the legs, allowing you to secure the legs in a closed position for storage or transport. Camera Plate Features: Sliding Balance Plate Camera Mounting Screw: 1x 1/4"-20 Male with Locating Pin 1x 3/8"-16 Male Counter Balance: Fixed Drag Type: Fluid Load Capacity: 17 lb / 7.71 kg Maximum Working Height: 64.25" / 163.19 cm (with Spreader) Minimum Working Height: 29" / 73.66 cm (with Spreader) Closed Length: 32.6" / 82.8 cm Materials: Aluminum Leg Lock Type: Lever Lock Leg Sections: 3 Feet Features: Dual Spiked Camera Plate Features: Sliding Balance Plate Camera Mounting Screw: 1x 1/4"-20 Male with Locating Pin 1x 3/8"-16 Male Balance Plate Sliding Range: 3.25" / 82.55 mm Plate Dimensions: 4.7 x 2 x 0.5" / 119.38 x 50.8 x 12.7 mm Head Base Mount: 75 mm Half Ball Counter Balance: Fixed Pan Handle Fittings: 2x Rosette Included Pan Handle Length: 15 to 23" / 38.1 to 58.42 cm Bubble Level: 1 Accessory Mounting: 2x 1/4"-20 Female Thread Pan & Tilt: Drag Control Tilt: Continuous Pan: Fixed Drag Type: Fluid Vertical Tilt: +70° to -80° Panning Range: 360° Independent Pan Lock: Yes Independent Tilt Lock: Yes Lateral Tilt: No Load Capacity: 17 lb / 7.71 kg Maximum Working Height: 64.25" / 163.19 cm (with Spreader) Minimum Working Height: 29" / 73.66 cm (with Spreader) Closed Length: 32.6" / 82.8 cm Materials: Aluminum Weight : 11.2 lb / 5.08 kg Leg Lock Type: Lever Lock Leg Positions: 2 Positions Independent Leg Spread: Yes Leg Sections: 3 Bubble Level: No Feet Features: Dual Spiked Spreader: Mid-Level (Integrated)