Other

At 16' feet long, IQwire CXRBON BLXCK X5 is our third longest single cable USB-C tether cable solution. Industrial strength with a Velocity Booster, IQwire is blazing fast. Intelliconnect Ultracore chipsets in each connector make IQwire the most intelligent tether cable out there.

IQwire tether cables feature either one, two or three Velocity Boosters*. With these built-in boosters, the data speed is boosted right as it comes out of the camera and twice more (on our 50' cables) a little further down the line. The days of using cable extensions and dongles are history as our long single cable tether cables make long connections simple again.

IQwire tether cables are embedded with Intelliconnect Ultracore chipsets in each connector. These allow IQwire to make a faster connection and negotiate the fastest data throughput available to each device. Fast connections and fast data are your friends with tethered photography.

Works with any camera with a USB-C port.

FRANCISCO AGUILA

CXRBON BLXCK X5 USB-C to USB-C 16' 5m Right Angle Intelligent Photography Tether Cable

At 33' feet long, IQwire CXRBON BLXCK X10 is our second longest single cable USB-C tether cable solution. Industrial strength with triple Velocity Boosters, IQwire is blazing fast. Intelliconnect Ultracore chipsets in each connector make IQwire the most intelligent tether cable out there.

IQwire tether cables feature either one, two or three Velocity Boosters*. With these built-in boosters, the data speed is boosted right as it comes out of the camera and twice more (on our 50' cables) a little further down the line. The days of using cable extensions and dongles are history as our long single cable tether cables make long connections simple again.

IQwire tether cables are embedded with Intelliconnect Ultracore chipsets in each connector. These allow IQwire to make a faster connection and negotiate the fastest data throughput available to each device. Fast connections and fast data are your friends with tethered photography.

Works with any camera with a USB-C port.

Qwire CXRBON BLXCK X10 USB-C to USB-C 33' 10m Right Angle Intelligent Photography Tether Cable

United States

Power2000 Battery For Sony  NP-FZ100

LAST ONE!  

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

BlueMark extends its family of RemoteID transponders for FPV drones with the db122fpv module.

DroneBeacon FPV is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU) and need both an external GPS receiver (NMEA or UBX) and external power (by the drone).

Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.

The db122fpv is a FPV RemoteID transponder 2x 6-pin JST-SH 1mm connectors: GPS IN and GPS OUT: SDA, GND, TX, RX, Vcc, SCL.    Mounts with 4x M3 screws (20 x 20 mm grid)

Dimensions 27 x 27 x 4 mm, 2.9 grams

DB122 Manual: https://download.bluemark.io/db122fpv.pdf
How to Configure Video: https://youtu.be/6nrq-DlshcI


ALIEN DRONES

LAST ONE - Bluemark DB122 FPV DroneBeacon FPV FAA Remote ID PCB  - The ORIGINAL Anti-Karen RID Module!

The Adobe Photoshop CC book for Digital Photographers, by Scott Kelby.

2017 release.

Excellent condition (small sticker on front from when it was in library).

Continental U.S.

Kelby's Adobe Photoshop CC book for Digital Photographers

TP-Link MR3040 battery-powered wireless router.

 Used by many photographers as a substitute for more expensive wireless modules for both Nikon and Canon digital cameras. Add FTP and wireless tethering capabilities to your digital cameras. Includes AC adapter and cables plus instructions.

I don't know battery condition (it appears to be fully charged) but the battery is interchangeable and they are available on Amazon and elsewhere.

TP-Link MR3040 battery-powered wireless router

Excellent condition and original box.  Original Price $399


About this Item

   - Small-diaphragm Condenser Microphone with Cardioid Polar Pattern
   - 10dB Pad - Nickel



KAIA RA

Warm Audio WA-84 Small-Diaphragm Condenser Microphone - Nickel

Unopened HDMI Splitter. 

Original Price: $35

Make sure to check out the other gear that is being sold.

OREI UltraHD 4K @ 60 Hz 1 X 4 HDMI Splitter 1 in 4 Out 4 Port 4: 8-Bit - HDMI 2.0, HDCP 2.0, 18 Gbps, EDID, Duplicate / Mirror 4K Screens - UHDS-104

Great condition.

Original price: $79

Make sure to look at the other gear that is being sold.

Av-jefes Avl-630-sh4 Earhook Headset Mic for Shure Wireless Microphone System 

MT-ViKI HDMI Splitter 1 in 4 Out, 1x4 Power HDMI Splitter 4 Ports w/AC Adapter, 4Kx2K@30Hz 3D Full HD Distributor for PS4 Fire Stick HDTV

In great condition and comes with the original box. 

Original price: $19

Make sure to look at the other gear that is being sold.

HDMI Splitter MT-ViKI

Ruko F11 Pro 2 is a decent budget drone kit with a decent camera. It sports an 8MP Camera and a 3-Axis Mechanical Gimbal.  


Package Includes:
1 x RC Quadcopter( with camera)
1 x Transmitter
2 x Battery
Remote USB adapter Cables
Spare props
Manual
Carrying Case

This is a very lightly used drone, flown twice only to test that it worked so you can be certain it connects and flies right out of the box.  This exact drone kit was flown and shown here: https://youtu.be/ktOIhI_oPA4 .  No toilet bowling.  Perhaps a bit spongy to me and the way I fly so when changing position be careful in tight areas or you might tag something.  I personally polished up and tested the system one last time before packaging with care, and it is a perfectly working drone.  It is absolutely better than factory new and for this reason (and because I know this is below any price you can buy it from Ruko or Amazon) absolutely no returns are allowed, so if you're not absolutely sure, don't buy this drone and let someone who is an Alien Drone lover take it home and care for it.  

Note that I can't be your free technical support guy so reach out to Ruko if you have any questions after you receive it...  Nothing personal, just setting expectations as you can't afford me as your technical support guy... :)  

LAST ONE!  Ruko F11 Pro 2 Drone - 3 Axis with 4k/30 video

Anker SOLIX C200 DC (60,000mAh), 192Wh Portable Power Station, LiFePO4 Battery, 200W Solar Generator, for Outdoor Camping, Traveling, and Emergencies

This actual unit was tested here: https://youtu.be/i-tYKSWAYBc and had only 1 recharge to make sure it works well.  It holds its power when in storage which is great, I've had other power stations that the charge drains over time and when you need it there's nothing or very little left. 

Overall this is a great little unit so if you're looking for some backup power on the go at a cheap price, probably won't find one better... 

Really, a nice little unit that should serve you well.

Note that are no returns on this item but you can rest assured that this was tested and polished up before shipping to you, that's just how I roll.

Anker SOLIX 200DC Power Station!

Anker SOLIX PS100 Solar Panel with Adjustable Kickstand, 100W Foldable Portable Solar Charger.  (The 300DC Power Bank can be purchased here: https://urlr.me/dCxnMa )

Up to 23% Conversion Efficiency: Charge 1.5× faster with highly efficient monocrystalline cells and a powerful surface that traps sunlight.
4 Set Angles for Max Sunlight Absorption: No matter where you are, the season, or time of day, you can maximize sunlight absorption. Easily switch between 30°, 40°, 50°, or 80° angles.

IP67 Waterproof Design: Your solar panels are safe, even when it's raining outside. 

This exact solar panel was used 1 time to test it and is shown here: https://youtu.be/i-tYKSWAYBc 

Sorry, for this price the item is not returnable but you can rest assured that it was checked out and packed with love so it is in perfect shape and 100% functional right before I placed it in the big ol' box. 



Anker PS100 100W Foldable Portable Solar Charger

Anker SOLIX C300 Portable Power Station, Outdoor 288Wh LiFePO4 Battery, 300W (600W Surge) Solar Generator, 140W Two-Way Fast Charging, for Camping, Traveling, and Emergencies.  This includes the bonus ANKER shoulder strap, a $20 value by itself!

======
NOTE that this MUST be purchased with the 100W solar panel https://urlr.me/xWjb7G  (purchase separately) as they need to ship separately.  I know this is a little inconvenient to have to order them separately, sorry, but because of the size of the solar panel there's no easy way to package/ship them together.  If you order this power bank without ordering the solar panel shortly after the power bank order will be canceled.
=====

This actual unit was tested here: https://youtu.be/i-tYKSWAYBc and had only 2 recharges.  It holds its power when in storage which is great, I've had other power stations that the charge drains over time and when you need it there's nothing or very little left. 

Overall this is a great little unit so if you're looking for some backup power on the go with a light and wireless charger and a solar panel to boot at a cheap price, probably won't find one better...  

Really, a nice little unit that should serve you well.

The units will be shipped in separate boxes.

Note that are no returns on these items but you can rest assured that this was tested and polished up before shipping to you, that's just how I roll.

Anker SOLIX 300DC Power Station (must purchase 100W Solar Panel separately)

Premium Tech Travel Charger for Sony NP-BX1

Like new, opened only for testing and review.

- LightBank Mito L22C
- Carrying case
- Power Ballast/Control Box
- Pop up grid
- Light mount
- Angle adjustment bracket
- Power cables
- USB-C cable

LightBank Mito L22C Inflatable RGB LED Light Panel (2' x 2')

Like new, opened only for testing and review. I have 2 for sale, DM me if you are considering both.

- LightBank Mito L14C
- Carrying case
- Power Ballast/Control Box
- Pop up grid
- Light mount
- Angle adjustment bracket
- Power cables
- USB-C cable

LightBank Mito L14C Inflatable RGB LED Tube Light (1 x 4')

Nodal Ninja 3 MKII is a pano tripod kit used to produce precise and level panoramas.  This kit is mainly used for real estate photography as well as landscape photography.  

JONATHAN GUNTHER

Nodal Ninja 3 MkII Pano Tripod Kit

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

BlueMark extends its family of RemoteID transponders for FPV drones with the db152fpv module.

DroneBeacon FPV is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU) and need both an external GPS receiver (NMEA or UBX) and external power (by the drone).

Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.

The DroneBeacon db152fpv is a small, but powerful (direct/broadcast) stand-alone Remote ID transponder for drones with 20 x 20 M3 holes and needs an external GNSS receiver. It is designed for FPV drones and supports any GNSS receiver with NMEA or UBX (u-blox) protocol. Of course, it can be used for other drones as well.

It is a PCB and needs an external GNSS (GPS) receiver (NMEA or UBX). 

It relays the GNSS information via the GPS out connector to the flight controller. The connectors are 6-pin JST-SH 1 mm. An antenna is provided (WLAN/BLE). The board and attached GNSS receiver are powered via the VCC pin of the GPS OUT port (4.75 to 15V). The db152fpv has a 20 x 20 grid with M3 holes for easy installation. The size of the board is 27 x 27 mm and the weight is 2.9 gram (including antenna).
DB152 Manual: https://download.bluemark.io/db152fpv.pdf
.
How to Configure Video: https://youtu.be/6nrq-DlshcI

NEW!  Bluemark DB152 DroneBeacon FPV FAA Remote ID PCB - The ORIGINAL Anti-Karen RID Module!

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

BlueMark extends its family of RemoteID transponders for FPV drones with the db153fpv module.

DroneBeacon FPV is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU) and need both an external GPS receiver (NMEA or UBX) and external power (by the drone).

Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.
The DroneBeacon db153fpv is a tiny, but powerful (direct/broadcast) stand-alone Remote ID transponder for drones, only 19 x 14 mm and needs an external GNSS receiver. It is designed for FPV drones and supports any GNSS receiver with NMEA or UBX (u-blox) protocol. Of course, it can be used for other drones as well.

It is a PCB and needs an external GNSS (GPS) receiver (NMEA or UBX). 

It relays the GNSS information via the GPS out connector to the flight controller. All connectors are solder pads on a 1.27 mm grid. An antenna is provided (WLAN/BLE). The board and attached GNSS receiver are powered via the + and – solder pads (4.75 to 15V).  The size of the board is only 19 x 14 mm and the weight is just 2 grams (including antenna).

DB153 Manual:  https://download.bluemark.io/db153fpv.pdf
.
How to Configure Video: https://youtu.be/6nrq-DlshcI


NEW!  Bluemark DB153 DroneBeacon FPV FAA Remote ID PCB - The ORIGINAL Anti-Karen RID Module!

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

BlueMark extends its family of RemoteID transponders with the db150, a SMALLER version of the popular db120 transponder. It is only 12.5 grams!

DroneBeacon is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU). Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.

The db150 is a 3rd generation RemoteID transponder that is half the size and weight of the db120. It is only 12.5 grams and supports all transmission modes and has a battery life of 120 minutes (2 hours).
With an alternate configuration the DroneBeacon can be more difficult to see with an ordinary cell phone, more about that in this video: https://youtu.be/GJBNqKafe-Q

DroneBeacon can be attached to a drone by using the included M3 dual-lock stickers or use the M5 screw noses. There are 4 battery LEDs to show the current battery level. The transponder can be configured easy using any device, by pressing the configuration button and connect to the dronebeacon Access Point. 

This is one of the only manufacturers of RID modules that has went through third partd independent audits and passed certification with the FAA so you can use it with confidence!  A manufacturer of RemoteID hardware can claim that it is compliant (self-declaration), but without a third party audit, there is limited assurance that this is indeed the case. This results in risks to operators (end-users) if the products they purchase are later found to be non-compliant.  It could result in rescinding of an accepted compliant product (drone or RemoteID add-on). This can especially result in high risks for professional users that have a large drone fleet. https://bluemark.io/2024/06/dronebeacon-product-notification/
 
DB150 Manual: https://download.bluemark.io/db150.pdf
DB150 Quick Start: https://download.bluemark.io/db150_quick_start.pdf
Firmware Update Vid: https://www.youtube.com/watch?v=OPoUM0J6FmY

.

How to Configure Video: https://youtu.be/6nrq-DlshcI


NEW!!  Bluemark DB150 DroneBeacon FAA Remote ID Module w/Battery - The ORIGINAL Anti-Karen RID Module!

This is the official USA site for purchasing the BlueMark modules through Alien Drones!

The DroneBeacon db120 is a direct or broadcast Remote ID long-range transponder, equipped with its own GPS and battery. A transponder is also called add-on, tracker, tag or (wireless) number plate.  The DroneBeacon can be attached to any (consumer) drone using the 3M dual-lock tape (included).  It is compliant with the (upcoming) standards in the EU and USA. The FAA has approved the db120 for usage in the USA. Furthermore, the transponder is optimized for long range due to its transmit power and antenna design. It also supports all transmission protocols for maximum flexibility. If you need a transponder without battery, but powered by the drone, the db121 or db121pcb is a better choice. 

With an alternate configuration the DroneBeacon can be more difficult to see with an ordinary cell phone, more about that in this video: https://youtu.be/GJBNqKafe-Q

DroneBeacon can be attached to a drone by using the included M3 dual-lock stickers or use the M5 screw noses. Fully charged, the db120 transponder allows a battery live over 3 hours. There are 4 battery LEDs to show the current battery level. The transponder can be configured easy using any device, by pressing the configuration button and connect to the dronebeacon Access Point. 

This is one of the only manufacturers of RID modules that has went through third partd independent audits and passed certification with the FAA so you can use it with confidence!  A manufacturer of RemoteID hardware can claim that it is compliant (self-declaration), but without a third party audit, there is limited assurance that this is indeed the case. This results in risks to operators (end-users) if the products they purchase are later found to be non-compliant.  It could result in rescinding of an accepted compliant product (drone or RemoteID add-on). This can especially result in high risks for professional users that have a large drone fleet.  https://bluemark.io/2024/06/dronebeacon-product-notification/
 
Message us for quantity discounts!
.
How to Configure Video: https://youtu.be/6nrq-DlshcI


DB120 Bluemark DroneBeacon FAA Remote ID Module w/Battery - The ORIGINAL Anti-Karen RID Module!

EXO Drones Blackhawk 2 PRO, hard to come by drone!  Yes, this is the PRO model of drone which is a fantastic flyer, Professional 48MP 4K HDR Drone.  Make no mistake, this thing is a beast!  5 Mile Range, 35 Minute Battery, Obstacle Avoidance, 4K UHD Camera. 1/1.3in CMOS Sensor, Follow-Me, Return to Home, +15 more.  Those are the specs, but keep in mind you never get the distance or the battery life specified by the manufacturer, ever.  That being said, I never had an issue with the distance and the batteries were decent.  Flew this maybe 10 times or so and captures some stunning footage with no issues.  As far as the obstacle avoidance it works pretty decent and does try to fly around things, but be realistic, as nothing is perfect.  Never crashed this and took very good care of it, parting with it so it can find a good home.  I used this exclusively with multiple android phones and tablets and never had an issue with connections or the app.  Speaking of the app, I struggled initially figuring out the app only to find out that the app listed in some of the documents takes you to the wrong app!  I searched the Play store for the "EXO Pro" app and that's the ticket.  Solves a lit of problems that some people have, not sure why EXO didn't do a better job with the simple thing like an app link, but you're welcome!  EXO is a company that DJI owners love to hate, but the hardware is Hubsan, so don't let the haters deter you, this is a good flyer.

Just a note, I have not updated the firmware lately though there is a new version available.  Not a big fan of upgrades if there is no issues as for me they seem to break things more than help, so if you want to ignore that prompt it is up to you.  I recommend not doing it unless it addresses something you find needs  
 updating...  Lastly, there is a quirk that I found and that is moving the sticks down and in on the remote will not start the motors.  You have to use the launch icon on the app and it works every time.  Not a big deal if you know that, but can't tell you how many times I sat and scratched my head before I figured that out.  

Comes with the drone, charging cables, 3 batteries, extra props, manuals and the carrying bag.  This exact drone was tested multiple times in multiple videos: https://youtu.be/iirwYPsFEFM  and was tested again right before putting it in the box, and honestly, it flies great and records great video.  It is not going to sneak up on anyone as it is an angry bee sound for sure, but maybe it will keep Karens away!  Anyway, to to this end, no returns are accepted.  If you're uncertain this nostalgic drone is for you, pass on it and let another fan have a chance at it.  Keep in mind that this practically flies itself but it does not come with personal technical support from me.  Nothing personal, just setting expectations.  

EXO Blackhawk 2 PRO Original!

The Auray MS-5130 Round Base Microphone Stand features durable, steel construction. An ergonomic twist-action clutch adjusts the height of the stand from 36.2 to 63", while the weighted round base and permanently-attached nonslip rubber feet keep it firmly and sturdily in place.

Height Adjustable: 36.2 to 63"
Weighted Round Base
Twist-Action Clutch
Durable Steel Construction
Nonslip Rubber Feet
5/8"-27 Top Thread