LAST ONE!  

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

BlueMark extends its family of RemoteID transponders for FPV drones with the db122fpv module.

DroneBeacon FPV is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU) and need both an external GPS receiver (NMEA or UBX) and external power (by the drone).

Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.

The db122fpv is a FPV RemoteID transponder 2x 6-pin JST-SH 1mm connectors: GPS IN and GPS OUT: SDA, GND, TX, RX, Vcc, SCL.    Mounts with 4x M3 screws (20 x 20 mm grid)

Dimensions 27 x 27 x 4 mm, 2.9 grams

DB122 Manual: https://download.bluemark.io/db122fpv.pdf


ALIEN DRONES

LAST ONE - Bluemark DB122 PCB DroneBeacon FPV FAA Remote ID PCB  - The ORIGINAL Anti-Karen RID Module!

LAST ONE!

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

LIMITED STOCK REMAINING!  The DroneBeacon db121 is a so-called direct or broadcast Remote ID long-range transponder, equipped with its own GPS receiver and needs to be powered by the drone. A transponder is also called add-on, tracker, tag or (wireless) number plate.  The db121 PCB is a transponder with a PCB only. It is compliant with the (upcoming) standards in the EU and USA. The FAA has approved the db121pcb for usage in the USA. Furthermore, the transponder is optimized for long range due to its transmit power and antenna design. It also supports all transmission protocols for maximum flexibility.

 DroneBeacon db121 pcb has 4x M2 holes for attachment. There is a status LED to show the status. The transponder can be configured easy using any device, by pressing the configuration button and connect to the dronebeacon Access Point.

Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.

DB121 Manual: https://download.bluemark.io/db121.pdf

Firmware files can be found here: https://dronescout.co/downloads/ (Version history: https://download.bluemark.io/dronebeacon_transponder_history.txt )

LAST ONE - Bluemark DB121 PCB DroneBeacon FPV FAA Remote ID PCB w/GPS, antenna and no Battery - The ORIGINAL Anti-Karen RID Module!

Experience breathtaking aerial photography with the DJI Mavic Air Drone Quadcopter, an innovative piece of technology designed for both amateur and professional drone enthusiasts. This used drone is in excellent condition, ensuring that you can capture stunning imagery and video footage without compromising on quality.
 
Key Features
<ul>
 <li>Compact and Portable: Weighing just 430 grams, the Mavic Air is easy to carry, making it perfect for travel.</li>
 <li>High-Quality Camera: Equipped with a 12MP camera capable of shooting 4K video at 30fps for professional-grade results.</li>
 <li>3-Axis Gimbal: Ensures stable footage and smooth movements, even in windy conditions.</li>
 <li>Intelligent Flight Modes: Includes features like ActiveTrack, QuickShots, and more for effortless image capturing.</li>
 <li>Long Flight Time: Enjoy up to 21 minutes of flight time on a single charge, allowing for extended shooting sessions.</li>
 <li>Advanced Obstacle Avoidance: Equipped with sensors that help avoid obstacles during flight for safer operation.</li>
</ul>
 
With its impressive features and excellent condition, the DJI Mavic Air Drone Quadcopter is the ideal companion for your next aerial adventure. Capture stunning visuals and elevate your creative projects today!

Continental U.S.

DJI Mavic Air Drone Quadcopter

DJI Mavic 3 Pro Fly More Combo. This Drone was just purchased in July of this year. It is in excellent condition! I am a Part 107 Pilot and I get to fly almost everyday the weather is nice. There is absolutely nothing wrong with this package. You will receive a total of 4 Batteries, PGYTECH Silicon protection cover for the Remote Control and a Screen protector.   A new FPV Tosky Lanyard strap for the Remote Control. All original parts, extra props, joysticks, battery charger with all the cords. This will ship in the original box. 
The reason that I'm selling it is that I'm waiting on the new Mavic 4 Pro to be released. In the meantime I will be flying my Mini 4 Pro.

GREAT DEAL

Ruko F11 Pro 2 is a decent budget drone kit with a decent camera. It sports an 8MP Camera and a 3-Axis Mechanical Gimbal.  


Package Includes:
1 x RC Quadcopter( with camera)
1 x Transmitter
2 x Battery
Remote USB adapter Cables
Spare props
Manual
Carrying Case

This is a very lightly used drone, flown twice only to test that it worked so you can be certain it connects and flies right out of the box.  This exact drone kit was flown and shown here: https://youtu.be/ktOIhI_oPA4 .  No toilet bowling.  Perhaps a bit spongy to me and the way I fly so when changing position be careful in tight areas or you might tag something.  I personally polished up and tested the system one last time before packaging with care, and it is a perfectly working drone.  It is absolutely better than factory new and for this reason (and because I know this is below any price you can buy it from Ruko or Amazon) absolutely no returns are allowed, so if you're not absolutely sure, don't buy this drone and let someone who is an Alien Drone lover take it home and care for it.  

Note that I can't be your free technical support guy so reach out to Ruko if you have any questions after you receive it...  Nothing personal, just setting expectations as you can't afford me as your technical support guy... :)  

Ruko F11 Pro 2 Drone - 3 Axis with 4k/30 video

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

BlueMark extends its family of RemoteID transponders for FPV drones with the db152fpv module.

DroneBeacon FPV is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU) and need both an external GPS receiver (NMEA or UBX) and external power (by the drone).

Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.

The DroneBeacon db152fpv is a small, but powerful (direct/broadcast) stand-alone Remote ID transponder for drones with 20 x 20 M3 holes and needs an external GNSS receiver. It is designed for FPV drones and supports any GNSS receiver with NMEA or UBX (u-blox) protocol. Of course, it can be used for other drones as well.

It is a PCB and needs an external GNSS (GPS) receiver (NMEA or UBX). 

It relays the GNSS information via the GPS out connector to the flight controller. The connectors are 6-pin JST-SH 1 mm. An antenna is provided (WLAN/BLE). The board and attached GNSS receiver are powered via the VCC pin of the GPS OUT port (4.75 to 15V). The db152fpv has a 20 x 20 grid with M3 holes for easy installation. The size of the board is 27 x 27 mm and the weight is 2.9 gram (including antenna).
DB152 Manual: https://download.bluemark.io/db152fpv.pdf


NEW!  Bluemark DB152 DroneBeacon FPV FAA Remote ID PCB - The ORIGINAL Anti-Karen RID Module!

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

BlueMark extends its family of RemoteID transponders for FPV drones with the db153fpv module.

DroneBeacon FPV is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU) and need both an external GPS receiver (NMEA or UBX) and external power (by the drone).

Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.
The DroneBeacon db153fpv is a tiny, but powerful (direct/broadcast) stand-alone Remote ID transponder for drones, only 19 x 14 mm and needs an external GNSS receiver. It is designed for FPV drones and supports any GNSS receiver with NMEA or UBX (u-blox) protocol. Of course, it can be used for other drones as well.

It is a PCB and needs an external GNSS (GPS) receiver (NMEA or UBX). 

It relays the GNSS information via the GPS out connector to the flight controller. All connectors are solder pads on a 1.27 mm grid. An antenna is provided (WLAN/BLE). The board and attached GNSS receiver are powered via the + and – solder pads (4.75 to 15V).  The size of the board is only 19 x 14 mm and the weight is just 2 grams (including antenna).

DB153 Manual:  https://download.bluemark.io/db153fpv.pdf



NEW!  Bluemark DB153 DroneBeacon FPV FAA Remote ID PCB - The ORIGINAL Anti-Karen RID Module!

This is the official US site for purchasing the BlueMark the modules through Alien Drones!

BlueMark extends its family of RemoteID transponders with the db150, a SMALLER version of the popular db120 transponder. It is only 12.5 grams!

DroneBeacon is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU). Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.

The db150 is a 3rd generation RemoteID transponder that is half the size and weight of the db120. It is only 12.5 grams and supports all transmission modes and has a battery life of 120 minutes (2 hours).
With an alternate configuration the DroneBeacon can be more difficult to see with an ordinary cell phone, more about that in this video: https://youtu.be/GJBNqKafe-Q

DroneBeacon can be attached to a drone by using the included M3 dual-lock stickers or use the M5 screw noses. There are 4 battery LEDs to show the current battery level. The transponder can be configured easy using any device, by pressing the configuration button and connect to the dronebeacon Access Point. 

This is one of the only manufacturers of RID modules that has went through third partd independent audits and passed certification with the FAA so you can use it with confidence!  A manufacturer of RemoteID hardware can claim that it is compliant (self-declaration), but without a third party audit, there is limited assurance that this is indeed the case. This results in risks to operators (end-users) if the products they purchase are later found to be non-compliant.  It could result in rescinding of an accepted compliant product (drone or RemoteID add-on). This can especially result in high risks for professional users that have a large drone fleet. https://bluemark.io/2024/06/dronebeacon-product-notification/
 
DB150 Manual: https://download.bluemark.io/db150.pdf
DB150 Quick Start: https://download.bluemark.io/db150_quick_start.pdf
Firmware Update Vid: https://www.youtube.com/watch?v=OPoUM0J6FmY

Message us for quantity discounts!



NEW!!  Bluemark DB150 DroneBeacon FAA Remote ID Module w/Battery - The ORIGINAL Anti-Karen RID Module!

This is the official USA site for purchasing the BlueMark the modules through Alien Drones!

The DroneBeacon db120 is a direct or broadcast Remote ID long-range transponder, equipped with its own GPS and battery. A transponder is also called add-on, tracker, tag or (wireless) number plate.  The DroneBeacon can be attached to any (consumer) drone using the 3M dual-lock tape (included).  It is compliant with the (upcoming) standards in the EU and USA. The FAA has approved the db120 for usage in the USA. Furthermore, the transponder is optimized for long range due to its transmit power and antenna design. It also supports all transmission protocols for maximum flexibility. If you need a transponder without battery, but powered by the drone, the db121 or db121pcb is a better choice. 

With an alternate configuration the DroneBeacon can be more difficult to see with an ordinary cell phone, more about that in this video: https://youtu.be/GJBNqKafe-Q

DroneBeacon can be attached to a drone by using the included M3 dual-lock stickers or use the M5 screw noses. Fully charged, the db120 transponder allows a battery live over 3 hours. There are 4 battery LEDs to show the current battery level. The transponder can be configured easy using any device, by pressing the configuration button and connect to the dronebeacon Access Point. 

This is one of the only manufacturers of RID modules that has went through third partd independent audits and passed certification with the FAA so you can use it with confidence!  A manufacturer of RemoteID hardware can claim that it is compliant (self-declaration), but without a third party audit, there is limited assurance that this is indeed the case. This results in risks to operators (end-users) if the products they purchase are later found to be non-compliant.  It could result in rescinding of an accepted compliant product (drone or RemoteID add-on). This can especially result in high risks for professional users that have a large drone fleet.  https://bluemark.io/2024/06/dronebeacon-product-notification/
 
Message us for quantity discounts!



DB120 Bluemark DroneBeacon FAA Remote ID Module w/Battery - The ORIGINAL Anti-Karen RID Module!

EXO Drones Blackhawk 2 PRO, hard to come by drone!  Yes, this is the PRO model of drone which is a fantastic flyer, Professional 48MP 4K HDR Drone.  Make no mistake, this thing is a beast!  5 Mile Range, 35 Minute Battery, Obstacle Avoidance, 4K UHD Camera. 1/1.3in CMOS Sensor, Follow-Me, Return to Home, +15 more.  Those are the specs, but keep in mind you never get the distance or the battery life specified by the manufacturer, ever.  That being said, I never had an issue with the distance and the batteries were decent.  Flew this maybe 10 times or so and captures some stunning footage with no issues.  As far as the obstacle avoidance it works pretty decent and does try to fly around things, but be realistic, as nothing is perfect.  Never crashed this and took very good care of it, parting with it so it can find a good home.  I used this exclusively with multiple android phones and tablets and never had an issue with connections or the app.  Speaking of the app, I struggled initially figuring out the app only to find out that the app listed in some of the documents takes you to the wrong app!  I searched the Play store for the "EXO Pro" app and that's the ticket.  Solves a lit of problems that some people have, not sure why EXO didn't do a better job with the simple thing like an app link, but you're welcome!  EXO is a company that DJI owners love to hate, but the hardware is Hubsan, so don't let the haters deter you, this is a good flyer.

Just a note, I have not updated the firmware lately though there is a new version available.  Not a big fan of upgrades if there is no issues as for me they seem to break things more than help, so if you want to ignore that prompt it is up to you.  I recommend not doing it unless it addresses something you find needs  
 updating...  Lastly, there is a quirk that I found and that is moving the sticks down and in on the remote will not start the motors.  You have to use the launch icon on the app and it works every time.  Not a big deal if you know that, but can't tell you how many times I sat and scratched my head before I figured that out.  

Comes with the drone, charging cables, 3 batteries, extra props, manuals and the carrying bag.  This exact drone was tested multiple times in multiple videos: https://youtu.be/iirwYPsFEFM  and was tested again right before putting it in the box, and honestly, it flies great and records great video.  It is not going to sneak up on anyone as it is an angry bee sound for sure, but maybe it will keep Karens away!  Anyway, to to this end, no returns are accepted.  If you're uncertain this nostalgic drone is for you, pass on it and let another fan have a chance at it.  Keep in mind that this practically flies itself but it does not come with personal technical support from me.  Nothing personal, just setting expectations.  

EXO Blackhawk 2 PRO Original!

PolarPro DJI Mavic 2 Cinema Series Filters are designed to reduce camera shutter speed so that you can create smooth cinematic aerial videos. PolarPro filters thread on in place of the stock DJI UV filter, ensuring easy installation and correct gimbal balance, no counterweight required. Built with AirFrame construction, total filter weight is radically reduced allowing fluid compatibility with the Mavic 2 gimbal system.

Features

Precisely engineered for DJI Mavic 2 Pro Includes: ND4, ND8, ND16, ND4/PL, ND8/PL, ND16/PL Mavic 2 filters, stock UV tool
Polarization indicator laser etched onto each ND/PL frame marks the strongest linear polarization angle
Cinema Series Glass – Low refractive index, color neutrality, perfect target transmission
Redesigned magnetic filter case with easier filter access and visibility

JORGE SOUTO

Polar Pro Cinema Series Set with case for Mavic 2 Pro 

DJI ND Filter Kit for Mini 4 Pro (3-Pack)

Only Used a Handful of Times

For DJI Mini 4 Pro Drones
ND16, ND64, and ND256 Filters

Open to Offers!

Please feel free to message me with any questions you may have!

Drones

Shop Used Aerial Photography Drones and Accessories