NEW!! Bluemark DS101-PCB DroneScout Bridge FAA Remote ID Receiver for Android/iOS

DroneScout Bridge is a very small receiver (46 by 14 mm and 3.5 gram!) to detect drones with RemoteID. The device has several operation modes.

First, it can act as wireless relay. Receive popular drones with RemoteID and convert it to a wireless signal that most smartphones (iOS/Android) understand. You can keep using your favorite RemoteID app.

Second, it can convert the detected RemoteID signals to MAVLink messages (ADSB_VEHICLE or OPENDRONEID message packs) and transmit them using the UART JST-SH 4-pin output connector. Use this for Detect And Avoid (DAA) applications running on your drone or aircraft. Or connect it to your favorite (embedded platform) to enable reception of RemoteID signals. Example Python and C code is provided.

Products

ds100 retail

Retail version of the DroneScout Bridge with enclosure, SMA connector and high-gain antenna

ds100 (PCB) with external antenna

The ds100 is a PCB-only version of DroneScout Bridge with IPEX3 antenna connector (including antenna)

ds101 (PCB) with internal antenna

The ds101 is a PCB-only version of DroneScout Bridge with onboard/internal antenna.

Specifications:

Short-range radio

Bluetooth 2.4 GHz

WiFi 2.4 GHz

Antennas

PCB antenna (internal/onboard) 3 dBi antenna

Detection range

up to 1 km. The actual detection range depends on a lot of factors.

Power

USB-C (powered by smartphone or USB power bank)

or JST-SH 4-pin connector: 5 -15 V

Average current consumption

450 mW

Connectivity

USB-C (serial interface)

2x JST-SH 4-pin connector (IN and OUT)

Bluetooth 4 (wireless relay mode)

Fastening mechanism

M2-mounting hole

Operating temperature

-20°C to +85°C

Dimensions

46 x 14 x 4 mm

Weight

2.5 gram

Alien Drones Video: https://youtu.be/dZP9AWuHpXg

Bluemark Website: https://dronescout.co/bridge/

Manual Here: https://download.bluemark.io/ds_bridge.pdf